HRC55 Uncoating / Rainbow coating series carbide end mills For Nonferrous Metals.
Carbide end mills to meet your demands.
Colour : Uncoating or Rainbow coating.
Coating : Advanced PVD coating technology.
Flutes : Square or Ball nose are acceptable . 2flutes/3flutes/4flutes(6flutes also )
Application : plane, side, groove milling.
 |
| DC SIZE (D1)mm | Length of flute(L2)mm | Dia of shank(D2)mm | Overall of length(L1)mm |
| 1.0 | 3 | 4 | 50 |
| 1.5 | 4 | 4 | 50 |
| 2.0 | 5 | 4 | 50 |
| 2.5 | 6 | 4 | 50 |
| 3.0 | 8 | 3 | 50 |
| 3.0 | 8 | 4 | 50 |
| 3.5 | 9 | 4 | 50 |
| 4.0 | 10 | 4 | 50 |
| 5.0 | 13 | 5 | 50 |
| 5.0 | 13 | 6 | 50 |
| 6.0 | 15 | 6 | 50 |
| 8.0 | 20 | 8 | 60 |
| 10.0 | 25 | 10 | 75 |
| 12.0 | 30 | 12 | 75 |
| 14.0 | 45 | 14 | 100 |
| 16.0 | 45 | 16 | 100 |
| 18.0 | 45 | 18 | 100 |
| 20.0 | 45 | 20 | 100 |
| 4.0 | 12 | 4 | 75 |
| 4.0 | 15 | 4 | 100 |
| 6.0 | 18 | 6 | 75 |
| 6.0 | 20 | 6 | 100 |
| 8.0 | 25 | 8 | 75 |
| 8.0 | 35 | 8 | 100 |
| 8.0 | 50 | 8 | 150 |
| 10.0 | 40 | 10 | 100 |
| 10.0 | 70 | 10 | 150 |
| 10.0 | 75 | 10 | 200 |
| 12.0 | 45 | 12 | 100 |
| 12.0 | 55 | 12 | 150 |
| 12.0 | 65 | 12 | 200 |
| 14.0 | 70 | 14 | 150 |
| 14.0 | 75 | 14 | 200 |
| 16.0 | 70 | 14 | 150 |
| 16.0 | 75 | 16 | 200 |
| 18.0 | 70 | 18 | 150 |
| 18.0 | 75 | 18 | 200 |
| 20.0 | 70 | 20 | 150 |
| 20.0 | 75 | 20 | 200 |
